Assigning cameras to users in the Axis W800 system controller

After you have configured the Axis W800 System Controller, you can assign cameras to users in the Axis W800 System Controller web interface.

1. Review the W800 web interface. The Dashboard should show any newly detected cameras.

   

2. Add the detected cameras.

   

3. From the W800 web interface, create the users you require.
   Note:

   Enter a username in the Clearance username section to automatically generate a user account inside Clearance for this user.

   

4. Open the user and assign a camera. Alternatively, if you are using camera self-assignment, assign a self-assign tag to the user.

   

5. Create more users and assign cameras to them as needed.
6. (Optional) Set camera profiles to configure the resolution, audio, GPS, and other settings. For more information about these configurations, refer to the Axis body worn system user manual.